Here you can find my latest published content. Use the Search!
May 21, 2021 Tutorial
In this video, I demonstrate how to implement a threshold using the audio grid in Bitwig Studio. I use a random drum loop as an example and show how to analyze the signal using a follower and a constant. I then subtract the constant from the follower to get the threshold line, which is then used to trigger a gate signal. I finish by showing how to adjust the threshold value and make sure the audio is in mono.
May 20, 2021 Tutorial
In this video, I show how to recreate the magic effect section of an Roland SP404 sampler hardware device in Bitwig Studio. I explain how to make a chain device to contain all of the effects, and then I go through each effect step-by-step. I demonstrate how to create a beat repeater, a bit crusher, an EQ, a delay, a filter, a pitch wobble, and a low fire effect. I also show how to use remote controls to trigger the effects and how to synchronize them to the beat grid. Finally, I provide a free preset to download in the description.
May 18, 2021 Tutorial
In this video, I take you through a journey of creating a 16-bar loop with the tools I showed in the last videos. I use a Euclidean rhythm generator, clap samples, hi hats, a Phase 1 synth, and a Polymer synth to create a nice beat. Then I use a Melody Generator and a Polysynth to create the melody. I also show you how to modulate the instruments and create transitions, as well as how to make a filter sweep. In the end, I have created a nice 8-bar loop and I hope that this video has been inspiring and educational.
May 17, 2021 Tutorial
In this video, I showed how to create a random melody preset in Bitwig Studio. I demonstrated how to use the Polygrid to generate notes and how to use a NoteFX layer to combine different synths and effects. I also showed how to change the scale and the length of the melody, as well as how to record it into a note clip. Finally, I discussed how to use the Euclidean rhythms generator to create shuffling rhythms.
May 14, 2021 Tutorial
In this video, I demonstrate how to create a super simple patch for Euclidean rhythms in the grid. I show how it looks like in Hatefish, and then explain how to implement it in the grid. I explain the three most important parameters (steps, beats and shift) and demonstrate how they can be used to create interesting rhythms. I also show how to use macros to control the parameters and how to use the Grid Node Out plug-in to generate notes. Finally, I provide a preset to make it easier to use the patch.
May 13, 2021 Tutorial
In this video, I experimented with Bitwig's modulation system and the HZF filter to create interesting sounds. I used the filter to analyze the input signal and amplify or suppress certain harmonics to get the desired sound. I also experimented with adding white noise and creating drone sounds by setting the filter to freeze and hold. I demonstrated how this could be used on a piano, vocals, and other instruments, and how presets can be saved with the current sound settings.
May 10, 2021 Tutorial
In this video, I discussed how the saturator in Bidig Studio works and how it can be used to enhance sound. I showed how the wave shaper works by changing the yellow line, and how the DC offset device creates a sound when modulated at audio rate. I also discussed the transfer function and how it can be used to change the wave shape of the signal in the positive and negative ranges. I then demonstrated the folding function and how it can be used to create a gate effect. Finally, I showed how the saturator can be used to add harmonics and make a sound more present, such as on a kick drum.
May 05, 2021 Tutorial
In this video, I showed what the new Smart EQ 3 plug-in from Sonible from Austria can do. I tested it out on my own track called Craft and went through how to use it for drums, bass, and the master. I showed how to apply different profiles and manual EQ, as well as how to use the grouping feature to make sure the tracks work well together. I also mentioned that Smart EQ 3 is aware of the context EQing and prioritizes certain things over others. Lastly, I suggested that users try out the trial version to get a feel for the plug-in, and if they like it, to purchase it.
May 04, 2021 Tutorial
In this video, I show how I combine sub-patterns to create a larger generative pattern. I demonstrate how to use the probability module in Bitwig Studio, and how to combine different sequences in a meaningful way. I also show how to use a sample and hold module, a transport playing module, and a compare function to create a trigger signal to reset the chance module. This technique can be used to create generative drum patterns, and it is a great way to exclude what you don't want and focus on what you do want in your track.
Apr 29, 2021 Tutorial
In this video, I showed how to use my voice as an instrument inside Bitvic Studio. I demonstrated how to create a vocal pad sound by using a Voice stack modulator and then showed how to use the Poly-Grid to control synths with my voice. I also showed how to use the Melda Auto Pitch Plug-in to create sounds on the fly and use a Zero Crossings module to get a clean pitch signal. Finally, I demonstrated how to create percussion sounds with my voice by using filters and transient shapers.