Music Production Knowledge Backlog
Here you can find my latest published content. Use the Search!
Jul 27, 2021 Tutorial
In this video, I discussed my recent journey with hardware synthesizers and how I have been integrating them into my setup. I discussed the process of setting up my mixing desk, an ADA 8200 extension port, and an ID14 MK2 sound card in order to record multiple hardware synthesizers at once. I also discussed the shortcomings of hardware synthesizers and how I have to record every parameter movement in order to keep the same sound. Finally, I mentioned my plans for creating special content for my Patreon gold tier members and potentially creating a tier for German videos.
Jul 20, 2021 Tutorial
In this video, I demonstrated how to use the mid-side split container in Bitweek 4.0 to create a stereo sound. I showed how to add a different kick drum sample to the side channel to create a difference between the left and right channels, and how to use an FX grid and the math operation subtract and add to get the side and mid channels respectively. I also showed how to use a polysynth and an audio receiver to create interesting effects. I hope this inspires you to experiment and come up with new ideas!
Jul 06, 2021 Tutorial
In this video, I showed how to use the polynomial modulator inside Bitwig Studio to create interesting distortion, wave shapes and overtones. I demonstrated how to use a DC offset device with the modulator, and how to modulate the X parameter with an audio rate modulator. I also showed how to use an LFO, as well as a stereo split to create unique sounds. Finally, I shared some tips and advice on creating presets, and how to save the new device for future use.
Jun 30, 2021 Release
2 drum & bass / techstep tracks. Very loud and nice and stuff.
Jun 27, 2021 Release
3 new darker tunes by polarity. watch the videos on my channel! www.youtube.com/c/PolarityMusic/
Jun 23, 2021 Tutorial
In this video, I discuss how to use Bitwig Studio and the Grid to utilize polyphony mode. This allows you to build a patch, and then create multiple instances of this patch by using multiple voices. I show how to use the envelope modulator to keep the voices alive and how to use the pitch input to tweak the voices differently. I also discuss how to use the volume knob, the loop mode, the phase input, and the reverse switch to achieve the desired effect. Finally, I explain how to use the Replacer to create a self-playing patch without notes.
Jun 08, 2021 Tutorial
In this video I introduce a new preset called UltraFat that I created in Bitwig Studios. It's an expander that pushes up sound that is above a certain threshold to 0 dB. I use 3 compressors in an FX3 container, and a limiter at the end. I also have a noise and low-fi function, as well as a cross-over knob. I demonstrate how it works by playing a drum loop, and show how it can be used to normalize sound levels. The preset is available to download on my Patreon page, and also on YouTube's community section.
May 21, 2021 Tutorial
In this video, I demonstrate how to implement a threshold using the audio grid in Bitwig Studio. I use a random drum loop as an example and show how to analyze the signal using a follower and a constant. I then subtract the constant from the follower to get the threshold line, which is then used to trigger a gate signal. I finish by showing how to adjust the threshold value and make sure the audio is in mono.
May 20, 2021 Tutorial
In this video, I show how to recreate the magic effect section of an Roland SP404 sampler hardware device in Bitwig Studio. I explain how to make a chain device to contain all of the effects, and then I go through each effect step-by-step. I demonstrate how to create a beat repeater, a bit crusher, an EQ, a delay, a filter, a pitch wobble, and a low fire effect. I also show how to use remote controls to trigger the effects and how to synchronize them to the beat grid. Finally, I provide a free preset to download in the description.
May 18, 2021 Tutorial
In this video, I take you through a journey of creating a 16-bar loop with the tools I showed in the last videos. I use a Euclidean rhythm generator, clap samples, hi hats, a Phase 1 synth, and a Polymer synth to create a nice beat. Then I use a Melody Generator and a Polysynth to create the melody. I also show you how to modulate the instruments and create transitions, as well as how to make a filter sweep. In the end, I have created a nice 8-bar loop and I hope that this video has been inspiring and educational.
previous | next