Here you can find my latest published content. Use the Search!
Nov 30, 2020 Tutorial
In this video, I'm using a drum machine to create a beat. I'm using four hi-hats and a clap, and then I'm experimenting with quantizing and layering different sounds in order to create a more natural and chilled out beat. I'm also using a synthesizer to create a kick drum and I'm adjusting the levels and the speed to create the exact sound I'm looking for.
Nov 28, 2020 Tutorial
I created some presets for 3.3, which I think will be released in a few weeks. I included 9 mid-range sounds, some pads and some plugs, with 4 knobs for remote controls. I also included some modulations and ADSRs with different repeating and timing, so you can get different tonalities and movements out of it. I also included some bass lines for drum bass and dub7, so that you can have more fun playing around with them.
Nov 26, 2020 Tutorial
In this video, I showcased the TEOTE plug-in by Voxango and explained why I think it's useful. I showed how I use it to reduce and push frequencies on my drum bus and how you can change the profile and bands. I also explained the dynamic section, with the FX knob and Mastering button, as well as the low cut and high cut, room dip and boost threshold. Finally, I shared my experience using the plug-in on drums and the master bus, and why I think it is great for rougher estimations or matchings.
Nov 17, 2020 Tutorial
In this video, I explain how to solve a problem of controlling multiple knobs and parameters in a grid patch. My solution is to use a value module and three of them, then dial in different values to create multiple combinations. I then use a chappy chef and oscilloscope to modulate the first value, and then modulate the second and third values in different speeds. I show how to use a B to Uni converter and a Module Lator Out to count all possible combinations, and then replace the value modules with a sine oscillator and ADSR. I explain how to use a macro modulator and a remote control modulator to control all the knobs in the grid, and how to use a random modulator with each voice. In the end, I show how to slowly fade between all the states instead of switching between them in a quantized manner.
Nov 04, 2020 Release
I have been producing less dancefloor suitable music lately, but two tunes came out anyway. Zaxx & Kaleun are a bit deeper and more restrained but still work well in a club context. The two tunes are completely produced in Bitwig and if you have a Patreon (10 bucks) membership you can download the projects there.
Oct 29, 2020 Tutorial
In this video, I showcase my three new presets - Berlin City, Berlin Verb and Berlin Tape - that I created for my five bug subscribers on YouTube and Patreon. I sampled noises from the streets of Berlin to analyze certain things, and I used a special method to create random multiple values in the grid with chapicef modules. I also mapped some MPE sensors to some knobs so you can use your MPE devices for this preset. With the remote controls and the snob, you can change the noise texture, the timing, the envelope, the stereo width, the pitch drift and the reverb. Berlin Tape is a tape emulation that you can bring in a lot of dirt and change the speed of the noise sample. I hope this video was helpful and I look forward to hearing your feedback.
Sep 19, 2020 Release
Once again I tried my luck at ambient inspired deep house / techno. Loomy and New Order are the latest results from my sound lab.
Sep 10, 2020 Tutorial
In this video, I showed how to use the Phase 4 synthesizer in Bitwig Studio to modulate the oscillator type with an LFO or an audio-rate signal from a different track. I also showed how to circumvent a bug that can occur when using VST instruments like FM8 or Massive, which blocks the note information from the note clip. I also shared a workflow tip for using multiple clips to easily make small changes to the pattern, and how to use odd divisions on the piano roll to create interesting grooves. Finally, I talked about how to use Bitwig modulators to control parameters in VST instruments that have a small, non-resizable interface.
Aug 31, 2020 Tutorial
In this video, I showed how you can create small percussion loops in Bitwig Studio without using any samples. I demonstrated how to use the e-tom device in combination with the polygrid and instrument selector to create interesting percussion patterns. I also showed how to use the dice and button modulators to randomly modulate the parameters of the e-tom device. Finally, I showed how to use the arpeggiator and round robin to create complex percussion patterns.
Aug 25, 2020 Tutorial
In this video, I show off my Mudpie tools, which are 35 presets that can be used to mess up and create interesting sounds out of any sound source. I demonstrate how to use each of the presets, and how they can be used to create unique and interesting sounds. I also explain how to download the presets as a Polarity Squad subscriber on Patreon or as a YouTube membership option. Finally, I encourage viewers to leave a comment or a like if they have questions or enjoyed the video.